OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
20
ZI-WP700T
12.1
Electrical connection
The mains plug on the device must match the mains socket. The plug must not be modified in
any way. Do not use any adapter plugs with a protective earth. Unmodified plugs and match-
ing outlets will reduce risk of electric shock.
If you are working with a power tool outdoors, use only extension cables that are also suitable
for outdoor use. The use of a suitable for outdoor use extension cord reduces the risk of elec-
tric shock.
12.1.1
Check the direction of rotation
D A N G E R
Pay attention to the direction of rotation (see arrow blade)
Rotation in the wrong direction, turn off the motor and change the
direction of rotation. You can change the direction of rotation by inserting
a screwdriver into the slot provided for this purpose in the plug and
adjust light pressure by left or right movement of the correct direction of
rotation.
13
OPERATION
13.1
Works
prior to commissioning
Check the running direction of the saw blade by turning the machine briefly. Correct direction:
see arrow on the blade guard or the blade.
Injury due to loosening of the blade - If the direction is incorrect, the machine must be switch-
ed off immediately. Then turn the phase inverter 180 ° (point 6.1.1).
Make sure that the blade is stuck, is in perfect condition, is sharpened, and guarantees perfect
operation.
Before each use, that the rocker unit is fully extended. Otherwise, there is an increased risk of
kickback.
When cut to foreign bodies, such as wires, nails, etc.- as well as irregularities in the material
such as knots.
Check whether the moving parts work properly and do not jam.
