OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
45
ZI-RWM84
Step 2: Lower the hood and the wheel is
brought to speed and braked again
within a few seconds.
Step 3: As long as the wheel is turning, no LED
lights are illuminated on the display.
Step 4: The balancing values are shown on the
display as soon as the wheel has
stopped.
Step 5: Raise the hood.
Step 6: Two methods are available to search
for weight position:
o
Manual position search
o
Automatic position search
(SPL)
NOTICE:
Do not exert any undue stress to the machine during wheel turn to obtain accurate values.
Never raise the hood before the wheel stopped.
To terminate a balancing process, press STOP key.
18.8.1.1.
Manual position search
To search first weight position (inner (left)
side), rotate the wheel with hand, as
indicated on the weight position indication
bar, turn the wheel backward (reverse spin
direction) or forward (spin direction) until all
LED-lights of the indication bar are
illuminated.
Hold the wheel for about 1 second to activate
the lock to keep it in position.
The quantity of the balancing weight to be
attached is shown on the inner weight display.
The correct position for attaching the weight is
on the inner rim (left) plane exactly in the
uppermost position (12 o'clock position).
Press the STOP key to unlock the wheel.
Alternatively, the wheel can also be turned
backwards.
To find the second weight position (outer
(right) side), rotate the wheel with hand, as
indicated on the weight position indication
bar, turn the wheel backward (reverse spin
direction) or forward (spin direction) until all
LED-lights of the OUTER (right) weight
position indication bar are illuminated.
Hold the wheel for about 1 second to activate
the lock to keep it in position.
The quantity of the balancing weight to be
attached is shown on the outer weight display.
The correct position for attaching the weight is
on the outer rim (right) plane exactly in the
uppermost position (12 o'clock position).
