21
Rear Hub Bearing Installation
Use a rubber mallet to tap the drive side of the axle until the raised
step on the axle contacts the bearing
Remove the axle from the tool.
Apply grease to the non-drive side axle bearing race.
Insert a SRAM 6903 tool into the non-drive side bearing bore.
Install the non-drive side end of the axle through the hub and into the
SRAM 6903 tool.
Install a Zipp 61903 tool onto the drive side end of the axle with the
stepped end of the tool contacting the bearing.
4
Plastic Mallet
5
Klüber Staburags NBU30 grease
6
SRAM 6903
7
Zipp 61903 Stepped End
