Charging the Battery
Plug the AC adapter into the DC input jack on the back side of your
Zipit device and into an AC power outlet. You can start using your
device immediately. Charge the battery for at least 3 hours before
removing the power adapter.
An LED on your Zipit device shows the status of your battery. If the
battery is charging (on AC power), the battery LED will be solid amber.
The LED will turn solid green when the battery is completely charged.
If the battery charge gets low, the LED will blink in amber, the battery
icon in the chat window header will flash, and you’ll see this message:
You’ll only
see this
message
once. If
you press
NEXT and
don’t
connect
your AC
adapter,
your Zipit
device will
turn itself off
in 5
minutes.
Turning the Zipit Device On and Off
To turn your Zipit device On or Off, press and hold the Power button
for at least one second.
4
