If you see any of these error messages, you can press PREV to retry
the connection. You can also press NEXT to configure the network
yourself. Follow these steps:
1. The Setup Wizard
displays an error
message.
2. Press NEXT to enter the
configuration information
yourself and connect to
the network manually.
3. The Setup Wizard asks you to enter manual settings. (If you do
not know it, you can get this information from your network service
provider.) Enter the requested information and press NEXT.
4. The Setup Wizard retries the connection process. When you see
the Connected screen, continue to the section “Defining Your
Messaging Accounts” on page 11. If you still cannot connect, see
below for additional options.
Possible Error Message Causes and Solutions
Automatic connection failed
Your device is not in range of any wireless access points.
–
Make sure that your access point is turned on and is functional.
Move closer to known wireless access points.
Available access points are not broadcasting their SSID.
Manually enter the SSID of the network (refer to the setup/configuration
page of the access point) in the space provided.
32
