13
Clamping screw
Power control
Contact for
the PAS sensor
On/Off button
Charger
socket
USB socket
Battery indicator
12
CYCLING WITH THE ZIPFORCE
Clip in the Zipforce and screw down the clamping screw (clockwise) until you see
that there is good pressure against the tyre. Make sure that the tyre is properly
inflated, at around 3-4 bar (43-58 PSI).
•
Insert the sensor cable.
•
Start the Zipforce, wait for the two beeps to sound within a few seconds.
•
Set how much assistance you would like using the power control. Feel free to
start with the power control in the middle to get a feel for which power setting
suits you.
•
Now you can start cycling just as normal.
•
To remove the Zipforce, unscrew the clamping screw and pull the lever on the
motor bracket while pulling out the Zipforce.
THE ZIPFORCE APP
Download the app via Google Play or the Apple Store. With the app, you can, among
other things, change the settings on your Zipforce and see information about your
Zipforce and cycling.
For more information and how to connect, see: zipforce.io.
ACCESSORIES
There are a variety of accessories such as mudguards, mobile phone holders, etc.
For more information visit zipforce.io.
