www.zipato.com
INTRODUCTION
Zipato PIR Motion Sensor is a passive infrared detector or physical sensor, the
sensor doesn’t emit any energy, but only passively receive and detect infrared
radiation. Sensor sends messages via Z-Wave network to the Z-Wave main
controller. In the communication between the PIR and Z-Wave main controller, PIR
sensor can only send messages and not receive them. When sensor is triggered, it
will send message to the main controller and associate devices to work through the
Z-Wave main controller. Sensor isbattery powered, small and can be installed
easily.
SPECIFICATION
Motion detection
Measure the light sensitivity
Compatible with 300 and 500 series
Range: up to 50m outdoor; 30m indoor
Power supply: CR123A x 1
Standby current: 16uA
Battery life: 1 year
Protocol: Z-Wave Plus
Detection range: 7 meters
Viewing angle: 110 degree
Operation temperature: 0 - 40 °C
Storage temperature: 0 - 60 °C
Size: 45 x 45 x 48 mm
INSTALLATION STEPS
• Holder installation
• Battery installation
• Fix PIR on the holder
HOLDER INSTALLATION
•
OPTION 1
Fix the holder with screws
and screw stopper
BATTERY INSTALLATION
FIX PIR ON THE HOLDER
•
OPTION 2
Fix the holder with double-sides
sticker
doors. Actual detection range of the sensor can be influenced by environment
conditions. If there are false alarms, check for any moving objects withing the
sensor’s detection area, such as trees blowing in the wind, cars passing by, etc.
False motion alarms may be caused by moving masses of air and heat as well. If
sensor keeps on reporting the false alarms, install the sensor in another place.
Work schematic diagram of PIR:
DETECTION RANGE AND WORKING CONDITIONS
PIR Sensor has to be installed in a corner of the room or perpendicularly to the
WORKING CONDITIONS
If there is someone moving withing the detection area, alarm will be triggered and
LED lights will flash in the inductive area at the same time.
TECHMICAL INFORMATION
• Use passive IR sensor to detect what is mocing
• When the sensor is triggered, LED light will flash in the detection area
• When there are people or animals moving in detection area, PIR sensor will send
alarm messages to the Z-Wave main controller
• Compatible with any Z-Wave main controller
PRODUCT CONFIGURATION
PACKAGE CONTENT
PIR Motion Sensor - 1pc
Probe - 1pc
Holder - 1pc
User manual - 1pc
Battery - 1pc
Screw - 2pcs
Screw stopper - 2pcs
QUICK INSTALLATION GUIDE
v1.0
PIR MOTION SENSOR
Holder
Screw stopper
Screw
Sticker
Inductive area
LED light
Battery
Code button
1.
2.
3.
4.
