Zip ZIP116, Instruction Manual

Page: 248 / 413

20/04/2023
242
Zip DVR Manual V2
ZipNVR.com
Post Recording
The Post Recording time determines how long the recorder continues to capture
footage for after the input trigger ends. This can be used to ensure you capture an
entire event as you may still require footage after a brief alarm trigger.
You can set the post recording time between 30 seconds and 5 minutes using the
Post Recording drop down list.
On Screen Notification
When Show Message is turned on an icon of a yellow bell will appear in the top right
corner when a channel is recording as the result of an alarm trigger. You can turn this
feature on or off using the
Show Message check box.
Email Notifications
You can set the recorder to include alarm triggers in its email reports by selecting the
Send Email check box. For more information on setting up emails accounts and
email schedules see the
Email section in the Network Menu.
FTP Uploads
You have the option to automatically upload snapshots or video footage to an FTP
server when an alarm is triggered. The snapshots and video footage will be from
each channel set to record for the effected alarm input. You will first need to configure
the FTP server connection as described in the
FTP section. Once this is set up
you can simply select the FTP Picture Upload and/or the FTP Video Upload check
boxes.
Cloud Uploads
You have the option to automatically upload snapshots or video footage to a cloud
storage account when an alarm is triggered. The snapshots and video footage will be
from each channel set to record for the effected alarm input. This can be Dropbox or
Google Drive. You will first need to configure your cloud storage account as
described in the
Cloud section. When you have set up your cloud storage account
you can select the Picture To Cloud and/or the Video To Cloud check boxes.
Open Full Screen On Alarm Trigger
By ticking the Full Screen check box you can tell the recorder to open a camera's
image full screen when an alarm is triggered. When enabled the recorder will display
the camera you have set to record for the effected alarm input. This is useful in
control room settings where the cameras are monitored.
This feature will only work when you have a single camera set to record as it
obviously isn't possible to open multiple cameras full screen at the same time.
309
314
329