Zip ZIP116, Instruction Manual

Page: 148 / 413

20/04/2023
142
Zip DVR Manual V2
ZipNVR.com
Port
This is the port in the router where the recorder will look for the camera. By default
this will be set as
Auto and it is recommended that you leave it as such. When set to
Auto the recorder will use the port which has been set in the camera. To specify a
port you will need to untick Auto .
Protocol
The protocol is set as Auto by default and it is recommended that you leave it as
such. When set to Auto the camera's protocol will be detected and set automatically.
For more information on configuring protocols see the Protocol Manage section.
Username & Password
When left as Default the username and password will be populated automatically
based on which protocol is detected for each camera. You can change the username
and password assigned to each protocol in the
Default Password screen.
You can manually enter the Username and Password if required. However, when you
do this the recorder will attempt to connect to each camera you are adding with those
credentials.
Once you are happy with the settings click Add to add the cameras to the recorder.
To exit without adding the cameras to the recorder click Cancel .
Note: If you are trying to add more cameras than there are channels available you
will get a message saying "No available channels to add more cameras". When
you see this message all available channels will have a camera added to them but
the leftover cameras will not be added to the recorder.
154
138