Zip Tudor II P4/52 Installation, Maintenance And User Instructions Download Page 4

 Instructions. V1.01 

Page 3  

JUNE / 2013

      

WARNINGS 

  

 

•   

Installation, commissioning and maintenance of this appliance must only be carried 

out by a competent installer who will then be responsible for adhering to all relevant 

standards and regulations.

•   The appliance must be disconnected from mains power supply before carrying out 

any work involving live circuits.

•   The appliance must be permanently connected to the supply through an isolating switch 

with a contact separation of at least 3mm in all poles and be protected by a suitably rated 
RCD.

• 

 To protect the appliance, an MCB (miniature circuit breaker) or cartridge fuse must be 
fitted with a rating suitable for the nomi nal current of the appliance.

•   The cross sectional area of the connection cable must be appropriate for the power rating 

and location of the appliance. See Technical Data. 

•   The connecting cable must be adequately secured.
•   

 This appliance must be earthed at all times.

•   Check that the power supply is switched off prior to electrical connection.
• 

 The appliance, its wiring and piping must not be modified in any way.

•   In case of malfunction isolate the power supply immediately. In case of leaks also isolate 

the water supply. Repairs must only be carried out by Zip Heaters (UK) Ltd or an authorised 

Zip service engineer.

•   Temperatures in excess of approximately 43°C are perceived as hot, especially by children, 

and may cause a feeling of burning. 

•   

This appliance must not be used by any person (inclu ding children) with limited physical, 
sensorial or mental abilities or failing experience and/or knowledge unless they are 
supervised by a person responsible for their safety or have received instructions about 
how to use the appliance. 

WARNING:

Situations that could cause injury to yourself or others.

CAUTION:

Situations that could cause damage to your appliance or other equipment.

NOTE:

Notes, usage tips or additional information.

IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. 

NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT 

CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO 

SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. 

RETAIN THESE INSTRUCTIONS FOR FUTURE USE.

Possible New Statement

Summary of Contents for Tudor II P4/52














Reviews: