Page 24 of 32
805846US v1.04 06.21 HydroTap G4 User Guide
Water Filter
Maintenance
1
The lights on your HydroTap and the Command Center
screen will notify you when a filter replacement is due.
Depending on local water quality conditions and usage,
the filter may require changing anywhere from 150 to 2650
gallons (500 to 10 000 liters). You may also need to replace
the filter if you notice an increase in chlorine, taste or odour.
Use only the correct replacement Cartridge, Part Number:
• 01034276 - 1Z-LS (for BCS & BCS100/75)
• 01034277 - 1.5Z-LS (for BCS160/175)
Cartridges are manufactured for Zip by Pentair Everpure,
EPA Est. No. 002623-IL-002. Replacement cartridges may
be purchased from your local Culligan dealer, Zip dealer or
other Zip approved distributors. See Contact Details at the
back of this manual.
For safe operation after periods of non-use
longer than 2-3 days, flush the HydroTap by
dispensing water through each water outlet for
at least 60 seconds, before consumption.
Do not use strong, corrosive or abrasive cleaning materials
on the HydroTap Command Center or Faucet. Chemicals
should NOT be sprayed onto the faucet at any time.
Clean the faucet and dispensing outlets with alcohol wipes.
Wipe clean the outer surfaces with a sponge or a soft cloth,
using a mild soap and water.
The Command Center must never be located near, or
cleaned with water jets.
Avoid using airborne pesticides near the Command Center.
Cleaning
