Page 6 of 28
801314 v3.05 09.20 HT BC Commercial Instructions
Important Safety Instructions
This manual contains important safety and installation instructions for the Zip HydroTap.
Safety
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
For products sold in Europe, this appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
Refrigerant
The HydroTap Command Centre contains R134A refrigerant under pressure. Maintenance of the refrigeration
unit must be carried out by an accredited service provider or qualified refrigeration technician.
Qualifications
If the power cable is damaged it must be repaired only by a qualified technician. To avoid hazards, all
Installation procedures must be carried out by a suitably qualified tradesperson. The power cable and power
outlet must be in a safe visible position for connection.
Venting
Sometimes steam and / or condensed droplets may discharge through a vent outlet at the tap. If the tap is not
installed using the Font pedestal, ensure the tap body is located so the tap outlet safely dispenses into the
sink bowl area.
Lifting
Take care when lifting the Zip HydroTap Command Centre. Some units may exceed safe lifting limits. If you
feel this is beyond your personal capabilities, please seek assistance with the lift. The weights of the units are
marked on the packaging. Do not lift the Command Centre by the front cover or any connections at the top
rear of the Command Centre. Refer to the technical specification for the weight of your product.
Airflow
The HydroTap Command Centre must operate within ambient operating temperatures between 5ºC - 35ºC,
when installed in a cupboard. The system will operate satisfactorily only with proper air ventilation and with
recommended air gaps of 50mm on each side. See section 2 for correct Installation details.
Frost Protection
If this appliance is located where the ambient air temperature could fall below 5ºC when the Command
Centre is not in use, do not turn off the appliance electrically. This safeguard does not offer the same
protection to the connecting pipework and fittings
Positioning
It is important to ensure the Command Centre is positioned in an accessible area close to the floor level. The
Command Centre must have its base mounted in a horizontal position with all inlets and outlets facing up.
The Tap must be located above the Command Centre and positioned so that it dispenses into the sink bowl
with ample clearance for a cup or tea pot. See section 1 for details.
!