Zip HydroTap All-In-One 89944 Installation And Operating Instructions Manual Download Page 20

Page 20 of 20 

 HydroTap Installation and Operating Instructions - 89944 - July 2011 v1.01

 Warranty

The standard cup referred to in this publication is 167 ml (6 fl oz). 
The standard glass is 200 ml (7 fl oz). 
The terms “Zip” and “HydroTap” are registered trade marks of Zip Heaters (Aust) Pty Ltd. 
Zip products described in this publication are manufactured under one or more of the following 
patents: AU675601, AU637412, AU635979, GB0422305, GB2065848, US4354049, US5103859, 
and US5099825.  Other patents are in force and patent applications are pending. 

As Zip policy is one of continuous product improvement, changes to specifications may be made without prior notice. 
Images in this booklet have been modified and may not be true representations of the finished goods.

Warranty table effective from 1st January 2009.

Full warranty details may be found on the  website

Normal Warranty

Extended warranty

12 Months

24 Months

36 Months

48 Months

60 Months

Domestic 

HydroTap

Parts & Labour

Parts & Labour

Replacement 
@25% rrp

Replacement 
@33% rrp

Replacement 
@50% rrp

HydroBoil

Parts & Labour

Parts & Labour

Replacement 
@25% rrp

Replacement 
@33% rrp

Replacement 
@50% rrp

AutoBoil

Parts & Labour

Parts Only

Replacement 
@25% rrp

Commercial 

HydroTap

Parts & Labour

Parts & Labour

All Other

Parts & Labour

Head Office

Zip Heaters (Aust) Pty. Ltd.
ABN: 46 000 578 727
67 Allingham Street
Condell Park NSW 2200 
Postal: Locked Bag 80
Bankstown 1885 Australia

Website: www.zipheaters.com
Facsimile: (02) 9796 3858
Telephone: (02) 9796 3100
Free Call: 1 800 638 633

Registering Your Purchase

Registering your Zip installation on the Zip website may help to establish date of installation should it become necessary 
to service the appliance under terms of the Zip warranty. To register your installation go to www.zipheaters.com and look 
under the heading “Register your purchase/Warranty information”, or forward the completed product registration form 
(enclosed) to your nearest Zip head office.

NOTE:

 Extended warranty and Pro-Rata warranty will only be available on products which have been registered with Zip 

head office

Summary of Contents for HydroTap All-In-One 89944





















Reviews: