Page 16 of 20
HydroTap Installation and Operating Instructions
Normal Operation (not available on HT boiling only series)
Set Time
To change time, press either Mode
>
or Mode
>
button until Set Time is on the display screen.
Press
>
Adjust button to increase time or
>
Adjust button to decrease time. Time increases
or decrease in increments of one minute. Hold the Adjust buttons down for rapid increases or
decreases. The time will be displayed in 24Hr mode.
Set Language
(option for EU models only)
EU models will have the default language set for German. To select English as the default press
the
>
Adjust button. To select German as the default Press
>
Adjust button.
Set Day
Press either Mode
>
or Mode
>
button until Set Day is displayed.
Press
>
Adjust or
>
Adjust to select day.
Filter Life
( Factory set at 6000 Ltrs )
Press either Mode
>
or Mode
>
button until Filter Life is displayed.
Press
>
Adjust button to increase Filter Life or
>
Adjust button to decrease Filter Life.
Filter Life increases in 1000 Ltr increments to a maximum of 10000 Ltrs.
Reset Litres Filtered
This function is to reset the Filter Change display after a filter has reached the end of its life (refer
to “Replace Filter Instructions” section of this document).
Press either Mode
>
or Mode
>
button until “Litres Filtered” is displayed. Press
>
Adjust once
and “Reset Counter” will be displayed, press
>
Adjust button once and “Are You Sure” will be
displayed.
Press
>
Adjust once and “Litres Filtered” will be reset to 0.
Activating Sleep Mode
This mode allows the HydroTap to go into Energy Saving mode. In this mode the unit will go to
“sleep” after a predetermined period of inactivity. Press either Mode
>
or Mode
>
button until
“Sleep Mode” is displayed.
Press
>
Adjust once to select
Option 1:
Sleep to 64ºC after 2 hours of NO USE
Press
>
Adjust once to select
Option 2:
Auto OFF after 2 Hrs of NO USE.
When the period of inactivity passes, the display will show “Sleep Mode”. During the “Sleep
Mode” the Red LED on top of the tap lever will flash slowly.
Sleep to OFF means the Boiling and Chilled circuits will be switched OFF
To de-activate the sleep mode, momentarily operate the Hot lever and then allow sufficient time
for the water to reach the set temperature
NOTE:
Operating the
Mixer tap will
not De-Activate
the sleep mode
or the energy
saver On/Off
timer mode.
Setting the Energy Saver Timer
(continued)
