Zip Contract II C2/100 Installation, Maintenance And User Instructions Download Page 13

 Instructions. V1.01 

Page 12  

JUNE / 2013

The Zip appliance you have chosen is precision-built from the finest materials available and 

should give many years of trouble free service.

Certain warranties may be implied by law into your contract with Zip.  

The warranty provided below is additional to these implied warranties and nothing set out 

below shall limit your statutory rights or rights at law.

Zip  Heaters  (UK)  Ltd  warrants  that,  should  any  part  fail  within  12 

calendar  months of 

installation, that part will be repaired or replaced free of charge by Zip or its Distributor or 

Service Provider, except as set out below, provided the appliance is installed and used strictly 

in accordance with the instructions supplied, and that failure is not due to accident, misuse, 

abuse, unsuitable 

water conditions, or to any alteration, modification or repair by any party 

not expressly nominated by Zip.

No costs are payable by the customer other than any mileage or travelling-time  charges 

incurred by a Zip Service Provider or the cost of removal, cartage and re-installation of any 

component of the appliance if it needs to be returned for repair to Zip or its Distributor.
This warranty does not cover damage resulting from non-operation of the  appliance or 

consequential damage to any other goods, furnishings or property.
Zip does not exclude, restrict or modify any liability that cannot be excluded, restricted or 

modified or which cannot, except to a limited extent, be 

excluded, 

restricted or modified as 

between the owner or user and Zip under the laws applicable.

Furthermore, this warranty does not displace any statutory warranty, but, to the  extent to 

which Zip is entitled to do so, the liability of Zip under any statutory warranty will be limited 

at Zip’s option to the replacement of the appliance or  supply of equivalent appliance, the 

payment of the cost of replacing the appliance or acquiring an equivalent appliance, or the 

payment of the cost of having the appliance repaired or the repair of the appliance.

Warranty

NOTE: 

It is our policy to continually improve products and as such we reserve the right to alter 

data, specifications and component parts without prior notice.

To ensure you have the latest revision of this instruction manual, please visit www.zipheaters.co.uk 
to download the latest copy.

IMPORTANT: 

No liability is accepted for incorrect use of this product.

The use of this crossed out wheeled bin logo indicates that this product needs 
to be disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been 
made for the collection and recycling of unwanted electrical and electronic 
equipment.
In order to preserve our environment we ask that you dispose of this product 
correctly. Please contact Zip Customer Service for advice on 0845 6 005 005.

Summary of Contents for Contract II C2/100














Reviews: