4
Instructions for user - CEX9-U - 801041 - November 2018 v1.00 Art.no:
9120-25688
To observe additionally for pressureless installation:
• The water outlet behind the devices must not be blocked, and the water
flow must not be restricted.
• The water outlet facilities, such as shower head, jet control and other outlet
unit, must be decalcified regularly. Deposits must be removed in regular
intervals.
• Only the fittings recommended by the manufacturer may be used.
• If the appliance is exclusively connected to a single shower, only the shower
heads recommended by the manufacturer may be used. No other fittings or
appliances which decrease the water flow to the shower may be installed.
age by an authorised technician in order to avoid any hazards.
• For appliances with direct connection, an all-pole disconnecting device
with a contact opening width of ≥ 3 mm per phase must be provided at the
installation end, according to Australian wiring rules AS/NZ3000.
• The wall bracket must be secured with the supplied screws and dowels. The
appliance must be secured to the wall bracket. The appliance may only be
operated if it has been properly mounted on the wall bracket.
• The prescribed nominal pressure stated on the rating plate may not be
exceeded at any time.
• The required water resistance may not fall below the value stated on the
rating plate at any time.
1. Safety instructions
