802261 - Residential HT- CO Installation Instructions - March 2016 - V3.00
Page 11 of 16
Note: The tube lengths are matched to the pumps performance and therefore CANNOT be lengthened
POWER
CORD
USB
CHILLED
OUTLET
MAINS
IN
Note:
All silicon
tubes must be cut to size.
They must have a constant
fall back to the unit.
Section 3
Undersink Unit Installation
BLUE
BRAIDED
3.1
Hose and tube fitting.
(Do not overtighten)
- Remove all caps from the top of the undersink unit ;
- Install the mains water braided hoses to the undersink unit before locating the unit in place.
- Fit the foam insulation to the Blue tube after trimming to length
280mm
MAX
1750 mm
MAX
400 mm
Min
50 mm
3.2
HydroTap
C
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the under
sink unit close
to the outlet tap,
within reach of
the hose and cord
lengths supplied