background image

5

807062 v1.00 03.21 EB HB Install Instructions

TECHNICAL SPECIFICATION

Before installation, ensure that:

•  All technical specifications and instructions have been reviewed and understood.
•  The mounting wall can support the product weight when full of water. See Technical 

specifications.

•  Sufficient space is provided to install the appliance and other components in accordance 

with these installation instructions. Check cable and plumbing against inlet /outlet  
positions before proceeding.

•  An easily accessible socket and double pole isolation switch (correctly rated for the 

appliance) is required. For models rated below 3kW: 220-240V AC 50-60Hz; for models 
rated above 3kW: 380-415V AC mains power.

•  The appliance must be connected to a potable water supply with working pressure of: AU/

NZ 150 - 700 kPa (1.5 - 7.0 bar); UK 70 - 500 kPa (0.7 - 5.0 bar).

•  The appliance must be connected with an isolating valve within reach of the hose and 

positioned so that the valve will not be obstructed.

•  A 350 kPa (3.5 bar) pressure limiting valve (not supplied) must be fitted if the incoming 

mains water pressure is likely to exceed 500 kPa (5.0 bar)

•  The appliance must be placed upright with its base in a horizontal position.

IMPORTANT! Do not proceed with the installation if these 
requirements are not met.

Tank 

size

(litres)

Heat up 

time 

(Inlet 

15°C) 

Heat up 

time 

 (Inlet 

10°C)

Rated voltage and power

Dimensions 

W x D x H

(mm)*

Filled 

weight

(kg)

3.0

16mins

17mins

220-240V, 50Hz, 1400W

220V, 60Hz, 1250W

300 x 183 x 439

12

5.0

16mins

17mins

220-240V, 50Hz, 2200W 

220V, 60Hz, 2000W

329 x 201 x 473

15

7.5

23mins

23mins

329 x 201 x 586

20

10.0

40mins

43mins

220-240V, 50Hz, 2800W 

220V, 60Hz, 2500W

401 x 249 x 606

27

15.0

40mins

43mins

401 x 301 x 606

33

25.0

47mins

50mins

401 x 301 x 786

47

40.0

60mins

64mins

220-240V, 50Hz, 5400W

220V, 60Hz, 4800W

380-415V, 2N, 50Hz, 5600W 

380V, 2N, 60Hz, 5000W

526 x 286 x 847

70

!

* add 98mm to Depth for Tap and Fascia (Econoboil AU, Hydroboil)
   add 96mm to Depth for Tap (no Fascia) (All other Econoboil)

Summary of Contents for 403042

















Reviews: