ClearStream User Manual - Copyright © 2007, 2006 Ziova Corporation 37
General Settings
Options not covered by the previous settings pages are accessible from the
“General” settings page.
From the “SETTINGS” page, select “General” and press “ok” on the remote.
Available options are:
•
CD/DVD/VCD Autoplay
(disc based content on CS505 only)
To choose to have the player Automatically play these discs when they are inserted, set
this option to “On”
•
Volume Controller
You can choose whether you want the Volume Controller turned On or Off.
Set this option to off if you are going to use the volume controls only on your amplifier or
display device.
Setting to on means that the ClearStream volume controls can be used to reduce the
volume of the signal output from the ClearStream to your amplifier or display device.
•
GUI Animations
Select ‘Disabled’ if you would like to turn off the animation of pop up windows and the
user interface.
•
Picture Slideshow Interval
Use to set the amount of time you wish for pictures to be displayed while doing a
slideshow.
•
Statusbar
Allows you to set what messages will appear on the screen while using you player.
You can use ‘None’ if you want no messages displayed, or one of ‘All’, ‘System
Messages’, ‘Track Info’
•
Screen Saver
The Screen Saver option allows you to select the timeout interval for when the screen
saver will activate.
Set to “Off” to disable the screen saver, or select a time interval for it to activate at. (The
options are Off, 1, 2, 3, 4, 5, 10, 15 or 20 minutes)
The screen saver will not activate while video is being played, but will activate if the
video playback is paused for the amount of time selected here.
If the screen saver is active, you can press any key on the remote or front panel to
deactivate it.
•
UPnP Support
Use this option to disable or enable UPnP support on your player. (default is off)
•
Commercial Skip Interval
Use this option to select the number of seconds to jump ahead when the STEP button is
pressed while watching video content.
If you press “exit” on the remote control at any time in this screen, you will exit this
setup screen.
If you have made any changes, you will be prompted to confirm that you wish to
discard the changes before exiting.
