29
each wireless client in your wireless network. When Key format is Passphrase, the key
value should have 8~63 ACSII chars. When Key format is Hex, the key value should have
64 hexadecimal digits (0~9, a~f or A~F).
Connecting Profile
To enable this function, this device must be in the client mode. User clicks to enable
this function and input the SSID of preferred AP and then click “Apply Changes”. The
BSSID field is an option in case of two preferred APs having the same SSID. In this
case, this device will check both SSID and BSSID and connect to the matching AP. We
can leave it empty in the normal case.
After enabling the connecting profile, the system will check the preferred SSID in a
fixed period. If preferred APs are found, the radio will try to connect with them one by
one from top to down of the list and regardless of the signal quality and strength. The
users can put their most favorite AP on the top so it will be connected first. Please note
that check the preferred APs will impact the throughput a lot! Unless the signal strength
is good enough, otherwise don't set the interval too short. The default value is 10
minutes. And currently, all the profiles share the same security setting.
To delete one SSID in the list, users click the square to select it and click “Delete
Selected” and then click “OK” in the pop-up window to confirm it. The user can delete
