43
SSID in your client settings.
IAPP (Inter-Access Point Protocol)
This function will let Wireless Stations roam among a network environment
with multiple devices. Wireless Stations are able to switch from one device to
another as they move between the coverage areas. Users can have more
wireless working range. An example is as the following figure.
You should comply with the following instructions to roam among the wireless
coverage areas.
Note
：
For implementing the roaming function, the setting MUST comply the
following two items.
z
All the devices must be in the same subnet network and the SSID must
be the same.
z
If you use the 802.1x authentication, you need to have the user profile
in these devices for the roaming station.
Block WLAN Relay (Isolate Client)
The device supports isolation function. If you are building a public Wireless
Network, enable this function can provide better security. The device will block
packets between wireless clients (relay). All the wireless clients connected to
the device can’t see each other.
Transmit Power
The device supports eleven transmission output power levels from 17 to
27dBm for CCK (802.11b) mode and eight transmission output power levels
from 17 to 24dBm for OFDM (802.11g) mode. User can adjust the power level
to change the coverage of the device. Every wireless stations located within
the coverage of the device also needs to have the high power radio. Otherwise
the wireless stations only can survey the device, but can’t establish connection
with device.
