Page 14
StEin
Stationary Equipment Module
Touch
the list to
switch between the half
or full screen display
4.
Monitoring and operating with the MX32
The
StEin
List
in the MX32 cab
Monitoring and operating stationary devices,
connected to the StEin modules.
The
StEin LIST
can be reached from the operating states
LOCO
or
SWI
with:
E-key
+ 8
StEin LIST
In the
StEin LIST
, all existing StEin modules in the system are arranged according to module num-
bers and represented by one line each; thus, depending on the presentation (half or full screen), few-
er or more modules are visible at the same time. Touching the screen anywhere in the list toggles be-
tween half or full screen display.
Briefly press the
(Shift) - Key
Switches the module line display between track sections,
switches, signals or inputs. The respective items displayed can be operated by the number keys.
GA - Track sections:
for each of the 8 connections is displayed:
- the current HLU state (dot in color gradation, as the red-green LED on the module itself),
- the occupancy state (yellow dot, like the yellow occupancy LED on the module),
- Overcurrent and short circuit conditions (blue dot, similar to the blue LED on the module).
The display logic of the colored dots in the list is similar to the LEDs next to the screw terminals of
the track connections, although not identical for practical reasons.
The HLU states can be controlled by the controller:
- press corresponding numeric key
to set it one step higher (i.e. H
UH, HU
U, etc.),
- press and hold the corresponding number key
displays list of HLU states,
Select a state by the corresponding number key.
Restarting a track section after a short circuit with the corresponding number key!
WE
– Turnouts or individual outputs:
for each of the 8 turnout outputs (2 pins each) you see:
- the current turnout setting by means of an arrow, which, according to the feedback, is either filled
or empty; it flashes until the desired end position is reached (with motorized turnouts) or in the
event of a malfunction.
The turnouts can be operated from the controller:
- press the corresponding number key
Switches the turnout back and forth.
IN - Switch inputs:
for each of the 16 switch inputs
- the current state (green dot means: ON).
(Shift)-
Software of ALL StEin modules is shown in the list; (to get a rough idea)
E-key
8-key
so E+8
