Type:
MK/MKS/MKR/MKRS
Version 1.8 / 07.05.2014
Clamping Elements
ZIMMER GmbH, Salmenkopf 5; D-77866 Rheinau-Freistett; TEL.: 0049/7844/9138-0; FAX: -80
Assembly_Instructions_MK_MKR_v18.doc
2/2
6.
Operational Test
6.1.
After the appropriate installation of the clamping element the operating readiness has to be tested
The mobility has to be tested by manually moving the slide.
The process of clamping has to be tested by manually moving the connecting construction.
The appropriate mounting of the fixed and flexible pneumatic pipe installation has to be tested by visual control.
All pneumatic connections at the pressurized element have to be visually checked for leakage.
All attachment screws have to be checked for their required moment (Tab.1).
6.2.
Readjusting
After appropriate installation, readjusting will not be necessary because the contact sections are preset ex factory.
Open the clamping element
Tighten adjustment screws clockwise until the contact section suits. (supplies, adapter)
Caution: Both adjustment screws have to be screwed in identically and subsequently have to be screwed back to an angle
of 15°.
Start operational test.
For further information, please contact our technical service: 0049/7844/9138-0
7.
Technical Data
Table 1
Size
Connection
estimated Consumption
per Cycle at 6bar
[cm³]
estimated PLUS-
Consumption
per Cycle at 6bar
[cm³]
Attachment Screw
Category of Solidity
8.8
tightening
Torque
[ Nm ]
12
M5
7
20
M4
2,8
15
M5
11
35
M4
2,8
20
M5
19
63
M5
5,5
25
M5
21
68
M6
9,5
30
M5
31
121
M8
23,0
35
M5
31
129
M8
23,0
45
M5
41
175
M10
46,0
55
M5
41
175
M10
46,0
65
M5
41
175
M10
46,0
Data concerning air consumption is approximate.
Technical modifications reserved.
Manufacturer's Statement
_____________________________________________________________________________________________
in terms of the EC – Machinery Directive 98/37/EG, Appendix II B
Herewith we certify that the type of construction
Product's Name: Clamping Elements
Part Number: MK / MKS
is – in its delivered version - intended to be installed into a machine or for the assembly with other machines in order to create a
new machine, and that its start-up is prohibited until it is proved that the machine, in which the above-named machine shall be
integrated, corresponds to the EC – Machinery Directive 98/37/EG.
..........................................................................................
Legally binding signature (business management)
Air Filter
Adjusment Screw
Spring Storage
Air Connection
