data: 04/10/04
File: P2XT_smd_ing.doc
Rev:1
pag 1 di 11
Description
The P2X_T instrument is a microprocessor programming single-axis positioner with analog outputs that
processes signals supplied by incremental transducers such as rotative and linear encoders. The current
dimension is displayed with six digits and high brightness (reading scale -99999, +999999). The instrument
setting is obtained by means of four keys on the front panel; an auxiliary two digit display allows an assisted
programming and moreover it visualises certain parameters during working.
The control of the positioning is made through the voltage analog output, that may be set-up as -10/+10V or
0/10V or current output 4/20mA. Other features are the relais outputs of Start/Forward/Backward, End of
positioning, and the inputs: Start, Emergency, Preset, Pieces-counter, all optoisolated.
To optimize the accuracy of the positioning, P2X_T requires entering a few parameters in order to compensate
the inertia of the system, the clearances and the wear of the mechanical couplings.
Other features of the instrument are: semiautomatic/automatic, manual, absolute/relative and line working
modes, 99 positioning dimensions memory and possibility to program the number of pieces to be
manufactured in sequence and the number of cycle repeats; test function to check inputs and outputs; serial
port RS232 o RS485 (optional).
Data storage with the machine switched off is ensured by EEPROM memory.
P2X_T is built into a panel case 48X96 according to DIN 43700.
Front view
RESET
ENTER
PGM
Keys
Counting display
Auxiliary display
Back view
Terminal board
Output/Power supply
Input
Terminal board
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18 19 20 21 22 23 24 25 26
Positioner with analog output P2X_T
P2X0T
P2X1T
P2X2T
P2X3T
