INSTALLATION AND OPERATING INSTRUCTIONS:
2-jaw parallel gripper, electric, HRC-03 series
38
DDOC00268 / g
EN / 2020-01-10
Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
+49 7844 9138 0
●
+49 7844 9138 80
●
www.zimmer-group.com
18. Declaration of Incorporation
In terms of the EU Machinery Directive 2006/42/EC (Annex II 1 B)
Name and address of the manufacturer:
Zimmer GmbH
77866 Rheinau, Im Salmenkopf 5
+49 7844 9138 0
+49 7844 9138 80
www.zimmer-group.com
We hereby declare that the incomplete machines described below
Product designation:
2-jaw parallel gripper, electric
Type designation:
HRC-03
series
conform to the requirements of the Machinery Directive, 2006/42/EC, Article 2g, Annex VII.b – Annex II.b, in its design
and the version we put on the market.
The following harmonized standards have been used:
Basic health and safety requirements:
No. 1.1.2, No. 1.1.3, No. 1.1.5, No. 1.3.1, No. 1.3.2, No. 1.3.4, No. 1.3.7, No. 1.5.1, No. 1.5.3, No. 1.5.4, No. 1.6.4, No.
1.7.1, No. 1.7.3.
DIN EN ISO 12100:2011-03 Safety of machinery - General principles for design - Risk assessment and risk reduction
DIN EN 60204-1 Safety of machinery – Electrical equipment of machines, part 1
DIN EN ISO 13849-1 Safety of machinery – Safety-related parts of control systems
DIN EN ISO 13849-2 Safety-related parts of control systems
A full list of applied standards can be obtained from the manufacturer.
Commissioning of the incomplete machine is prohibited until it has been found that—where applicable—the
machine in which the above-mentioned incomplete machine is to be installed complies with the Machinery
Directive (2006/42/EC).
Authorized representative for the compilation of
relevant technical documents
Kurt Ross
See manufacturer's address
Rheinau, Germany, 2019-09-02 Martin Zimmer
First name, last name
Address
(Place and date of issuance)
(Legally binding signature)
Managing Partner
