Zimmer GmbH
•
Am Glockenloch 2
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
47
INSTALLATION AND OPERATING IN-
STRUCTIONS:
GEP5000/GED5000 electric gripper series
EN / 05/01/2021
DDOC00211/i
14 Accessories/scope of delivery
INFORMATION
If any accessories not sold or authorized by Zimmer Group are used, the function of the product cannot be
guaranteed. Zimmer Group accessories are specifically tailored to the individual products.
Optional accessories and those included in the scope of delivery can be found at
www.zimmer-group.com
.
15 Transportation/storage/preservation
►
The product must be transported and stored only in the original packaging.
►
During transport, make sure that no unintended movements can occur if the product is already mounted on the
higher-level machine unit. Prior to commissioning and after transport, check all power and communication connections
as well as all mechanical connections.
►
Observe the following points when storing the product for longer periods of time:
•
Keep the storage location as dust-free and dry as possible.
•
Observe the temperature range and avoid temperature fluctuations.
• Avoid wind, drafts and formation of condensation.
• Cover the product with a weatherproof, tear-resistant foil to prevent dust.
• Avoid direct sunlight.
►
Clean all components. There must be no dirt left on the components.
►
Visually inspect all components.
►
Remove and foreign objects.
►
Remove potential corrosion spots properly.
►
Seal electrical connections using suitable covers.
16 Decommissioning/disposal
INFORMATION
When the product reaches the end of its operational phase, it can be completely disassembled and disposed of.
►
Disconnect the product completely from the power supply.
►
Dispose of the components properly according to the material groups.
►
Comply with the locally applicable environmental and disposal regulations.
