Zimmer GmbH
•
Am Glockenloch 2
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
20
INSTALLATION AND OPERATING IN-
STRUCTIONS:
GEP5000/GED5000 electric gripper series
EN / 05/01/2021
DDOC00211/i
7.6 Static charge
NOTICE
Non-compliance may result in material damage.
Grounding the product mount / gripper jaws is recommended if ESD-sensitive parts come into contact with the
product.
Grounding is also recommended in applications that require high EMC shielding.
The movement of the gripper jaws creates low voltages as a result of static charging. These charges cannot be dissipated if
the product is mounted on an insulating surface and if discharge is also not possible through the workpiece.
7.7 Heat dissipation
In the event of high ambient temperatures, the gripper must be installed on heat-dissipating materials.
If the gripper is operated under very high ambient temperatures and with fast clock cycles on an ongoing basis, this might
reduce its service life.
7.8 Installing accessories
NOTICE
Before installing an accessory, make sure it is suitable for use with the selected variant.
Please contact Zimmer Customer Service if you have any questions.
