background image

21

14 RoHS declaration

in terms of the EU Regulation 2011/65/EU

Name and address of the manufacturer:
Zimmer GmbH

Im Salmenkopf
77866 Rheinau, Germany
+49 7844 9138 0

[email protected]
www.zimmer-group.com


We hereby declare that the incomplete machine described below

Product designation:

Tool changer

Type designation:

FWR series

conforms to the requirements of the directive in its design and the version we put on the market.

Michael Hoch

Rheinau, Germany, 2021-12-09

Authorized representative for the 

compilation of relevant technical 

documents

(Place and date of issuance)

Martin Zimmer

(Legally binding signature)

Managing Partner

15 REACH declaration

In terms of the EC Regulation 1907/2006

Name and address of the manufacturer:
Zimmer GmbH

Im Salmenkopf
77866 Rheinau, Germany
+49 7844 9138 0

[email protected]
www.zimmer-group.com


REACH stands for 

R

egistration, 

E

valuation, 

A

uthorisation and Restriction of 

Ch

emicals.

A full declaration of REACH can be obtained from the manufacturer due to the duty to notify in accordance with Art. 33 of 

the REACH regulation (“Duty to communicate information on substances in articles”).

Michael Hoch

Rheinau, Germany, 2021-12-09

Authorized representative for the 

compilation of relevant technical 

documents

(Place and date of issuance)

Martin Zimmer

(Legally binding signature)

Managing Partner

INSTALLATION AND OPERATING INSTRUCTIONS:

FWR

DDOC01406 / -

EN / 2022-05-10

Zimmer GmbH • Im Salmenkopf 5 • 

 77866 Rheinau, Germany • 

 +49 7844 9138 0 • www.zimmer-group.com

Summary of Contents for FWR Series
























Reviews: