11
10 Installation
WARNING
Risk of injury due to uncontrolled movements
Risk of injury in case of unexpected movement of the machine or system into which the product is to be installed.
►
Switch off the energy supply of the machine before any work.
►
Secure the power supply against being switched on unintentionally.
►
Check the machine for any residual energy that may be present.
CAUTION
Risk of injury due to electrical voltage
Risk of injury in the event of uncontrolled movement of the product when the power supply is connected.
►
Switch off the power supply to the machine before carrying out any work.
►
Secure the power supply against being switched on unintentionally.
NOTICE
►
Installation may only be carried out by qualified personnel in accordance with these installation and operating
instructions.
►
Switch off the power supply before any assembly, installation or maintenance work.
10.1 Installing the product
The product is designed for installation on a standard 35 mm-wide profile rail.
The mounting position can be upright on the profile rail or suspended (profile rail mounted in the control cabinet).
►
Keep a clearance of 5 cm each on the side of the ventilation slots of the product for air circulation.
INSTALLATION AND OPERATING INSTRUCTIONS:
SCM
DDOC00734 / c
EN / 2022-05-09
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
