11 |
iASSIST 2-Pod Version
Surgical Technique
Distal Femoral Cut
Instrument Assembly
The femoral instrumentation is not side specific,
therefore it is used for left and right knees.
1. Insert the femoral saw slot into the femoral distal
cut guide and tighten it at the “0” position with a
3.5 mm hex head screwdriver.
Note:
The femoral saw slot when secured at
the “0” position on the femoral distal cut guide
resects 10 mm off the most distal condyle.
2. Assemble the femoral A/P slider to the distal
femoral cut guide by tightening the blue screw.
3. Clip the cut guide pod to the distal femoral cut
guide.
4. Clip the reference pod to the femoral reference.
Note:
The A/P slider and the distal femoral cut
guide are also available to fit high BMI patients.
Refer to part numbers:
20-8011-027-50 HBMI Distal Femoral Cut Guide
20-8011-028-50 HBMI Femoral A/P Slider
Figure 3.3
Distal Femur Cut – Instrument Assembly
1
2
Summary of Contents for iASSIST Knee
Page 1: ...iASSIST Knee 2 Pod Version Surgical Technique ...
Page 2: ......
