ZIMM ZA-25, Instruction Manual

Page: 29 / 37

7 Operation and maintenance ZIMM Actuator
2023 Version 0.6 32
Greases Standard grease for Ball screw drive KGT
Part no.: Castrol Tribol GR 4747/220-2 HT,
400 ml cartridge
WARNING
Danger of burns!
Operating temperature too high.

Let the ZIMM Actuator cool down.
1.
Approach lubrication position SP1 or SP2 to ±2 mm.
2. Remove the protective cap from the grease nipple.
3. Press the connection of the grease gun onto the grease nipple.
4. Fill the lubricant.
NOTE
The lubrication interval depends on the application.

Lubrication positions
must be approached to within ±2 mm.
 In extreme situations (high load, long duty cycle or fast travel) lubrication
should be adjusted. ZIMM will be happy to advise you.
CAUTION
Unsuitable grease!
Damage to the spindle.

Do not use multi-purpose grease.

Do not mix greases.

When changing the grease: Clean the spindle then regrease it.

If necessary use special grease.

Use only greases that are approved by ZIMM GmbH.

ZIMM will be pleased to give advice.