ZiLOG Zdots eZ80AcclaimPlus, User Manual

Page: 18 / 34

The eZ80AcclaimPlus! Development Kit UM024401-0412
8
eZ80AcclaimPlus! Development Kit
User Manual
1. Connect one end of the 6-circuit ribbon cable provided in your Kit to the USB Smart
Cable unit, ensuring that the ribbon’s male connector is aligned correctly with the
female connector on the unit, as indicated by the red stripe in Figure 3.
2. Connect the other end of the ribbon cable to Debug Connector J1 on the Development
Board. Ensure that Pin 1 on the ribbon cable is aligned with Pin 1 on the target con-
nector, as highlighted in Figure 4.
Figure 3. Connecting the Six-Conductor Ribbon Cable to the Serial or USB Smart Cable
Figure 4. Debug Connector J1