Wireless Zdots
®
Single Board Computer Development Kit
QS007504-0410
Page 5 of 19
Installing the ZDSII Software and Kit Documentation
Follow the steps below to install the ZDS II and documentation:
1. Insert the ZDS II CD into the CD-ROM drive.
DemoShield
launches automatically. If
the
DemoShield
does not launch automatically, open the Windows Explorer, browse
to your CD-ROM drive, and double-click
launch.exe
to launch the installer.
2. From the product installer list you can choose to install ZDS II alone, or both ZDS II
and associated documentation. You can also copy the documentation directly from
your CD-ROM drive to your hard disk using Windows Explorer or read the documen-
tation directly from the CD-ROM itself.
For customer service and technical support, Zilog
®
recommends you to create an account
on
http://support.zilog.com
.
Installing the USB Smart Cable
Follow the steps below for installing the USB Smart Cable and associated driver software.
Windows Vista-32
Follow the steps below to install the USB Smart Cable for Windows Vista-32.
1. Connect the USB Smart Cable to the Host PC. The
Found New Hardware
dialog box
is displayed.
2. Select
Locate
and install the driver software (recommended)
. The
Driver Soft-
ware Installation
window is displayed, and then the
Found New Hardware-USB
Smart Cable
dialog box is displayed.
3. Select
I don’t have the disc
.
Show me other options
.
4. Select
Browse my computer for driver software (advanced)
.
5. Browse to the following driver directory:
<ZDS II Installation Directory>\device drivers\USB
The
Windows Security
dialog box is displayed.
6. Select
Install this driver software anyway
.
7. When the software is installed, click
Closed
.
