Wireless Zdots
®
Single Board Computer Development Kit
QS007504-0410
Page 15 of 19
Configuring the Router
The following steps below in configuring the router is set with SSID equal to
‘NETGEAR’ and the generated keys:
These steps are based on LINKSYS WRT54G Router.
1. Disable the wireless connection on your laptop/PC.
2. If you are using Proxy server for your LAN settings, you can disable it by browsing to
Start
Settings
Control Panel
Internet Options
Connections
LAN Settings
. Uncheck the proxy server on Proxy Server section then select
Automatically detect settings
on Automatic configuration section. Then click
OK
on
LAN Settings and Internet Properties.
3. Connect the cable on the Ethernet port of your laptop/PC to the router (AP) using one
of its port (not the internet port).
4. Power ON your router.
5. Type 192.168.1.1 in the address bar of Internet Explorer (IE).
6. Enter ‘admin’ in the Password field. Do not enter any User name. You can now see the
Linksys page as displayed in
Figure 9
.
7. Select
Wireless
Basic Wireless Settings
. Change the
Wireless Network Name
(SSID)
: field to ‘NETGEAR’. See
Figure 9
.
Note:
