Z8 GP™ ZGP323 In-Circuit Emulator
User Manual
UM019606-0408
Introduction
6
socket to accept 20/28-PDIP chip packages.Other adapters are avail-
able separately, see
Z8 GP Package Support and Ordering Informa-
for more information.
After installing the OTP chip into the ZIF socket (or programming
adapter), you can program the chip using the instructions provided in
Connecting ZGP323 ICE to a PC
You can connect the ZGP323 ICE to a host PC using either an Ethernet or
USB port. To connect the ZGP323 ICE to a host PC using Ethernet, see
. To connect the ZGP323 ICE to a host PC using
USB port, see
Ethernet Port Connection
Follow the steps below to connect the ZGP323 ICE to a host PC using
Ethernet:
1. Connect a CAT-5 crossover cable from the PC to the Ethernet port on
the ZGP323 ICE, see
.
You can connect the ICE to an Ethernet hub using a CAT-5 patch
cable.
2. Connect the serial COM port on the PC to the SETUP serial port on
the ZGP323 ICE using the DB9-to-DB9 serial cable, see
Note:
