User
’
s Manual
SP226
9
ì
Immediately after setting the first time period, the display enters into the operating menu of next time period.
ì
Perform like above steps, the other two time periods can be set.
Note:
If you want to shut off one of the three time periods, you can set a same value for both start time
and end time, e.g., you can set both the start and end time of second time period at 10:00 am.
3.5
Switching on/off auxiliary heating manually
If you want to use warm water immediately, but the water temperature doesn
’
t reach the desired value, you can
switch on/off the auxiliary heating manually.
ì
Press
“
Choose Function
”
, until
“
”
displays on the screen.
ì
Press
“
Confirm
”
button to switch on auxiliary heating manually.
ì
Press
“
Cancel
”
button to switch off auxiliary heating manually.
3.6
Forbid/Permit auxiliary heating
ì
Press
“
Choose Function
”
button, until
“
”
displays on the
screen.
ì
Press
“
Confirm
”
button to save the setting and forbid auxiliary
heating.
ì
Press
“
Choose Function
”
button until
“
”
displays on the
screen.
ì
Press
“
Cancel
”
button to cancel the setting and permit auxiliary heating.
Note:
When forbid auxiliary heating, customer can
’
t switch on/off auxiliary heating manually and
time-controlled auxiliary heating function is also automatically deactivated.
3.7
Storage tank overheating protection
To avoid overheating of water storage tank, system is supported with an overheating protection function. When
the temperature of tank (T3) is higher than the maximum tank temperature, even the condition of temperature
difference circulation is reached, solar pump is still forbidden to operate.
ì
Press
“
Choose Function
”
button, until
displays on the
screen.
ì
Press
“
”“
”
button to adjust the maximum tank
temperature. Default value: 80
℃
, setting range: 60
℃
–
90
℃
.
ì
Press
“
Confirm
”
button to confirm the setting, press
“
Cancel
”
button to quit the function.
Summary of Contents for SP226
Page 1: ......
