Zigmund & Shtain 172.921, Instruction Booklet For Installation, Use, Maintenance

Page: 38 / 44

CLEANING AND MAINTENANCE
Cleaning the oven door
Dismounting the glass panes of the door
IMPORTANT : for your safety, before dismounting the glass panes,
remove the door from the oven.
For easier cleaning, after having removed the door from the oven, the glass panes
can be dismounted. You only have to remove the two upper blocks (fig. C) to be
able to slide out the windows (fig. D). After cleaning, remount the glass panes by
replacing the blocks and checking that all the parts are correctly fixed. Only then
remount the door on the oven.
!
C
D
OK
Please keep the OK symbol below on the right.
Dismounting the door
1. Open the oven door to its full extent
2. Move the hinge stops depending on the model, as shown in figure A1 or A2.
3. Turn the door towards the closed position until it rests on the stops. This blocks
the hinge spring. Continue to close the door so as to remove the hinges from
their housings, then raise and lift off the door (fig. B).
Perform the operations described above in reverse order to fit the door back in
place.
B
A
2
A
1
16 - ENGLISH