Zigmund & Shtain 172.921, Instruction Booklet For Installation, Use, Maintenance

Page: 27 / 44

INSTRUCTIONS FOR USE
All food must be cooked with the oven door closed
The oven has a central display with “touch” controls, to select the different
functions place your finger on the symbol required. There's no need to press.
WARNING!
The following symbols appear in all the programming pages:
Touch this symbol for a few seconds to start the cooking process.
Touch this symbol for a few seconds to turn off the oven. This
function can also be used when the control lock is on.
Shows the temperature. The colour of the number changes,
depending on the condition of the oven: white when the oven is off,
alternately flashing white-red when the oven is warming up and red
once the selected temperature has been reached. It can be
regulated by touching the number and then using the “up” and
“down” arrows.
Touch this symbol to turn the oven light on/off. It also turns on and
off automatically as each control is used.
Touch the symbol to go back to the previous page.
Touch the symbol to confirm the settings made.
Touch the symbol to set the time the cooking process lasts (up to
199 minutes). It is also use to set the time of day the cooking
process must end (up to 23 hours and 59 minutes) in the manual
programs.
Tells you when to place the food in the oven. In the automatic
programs, this is indicated by a beeping signal and a figure on the
display. Touch the figure to silence the beeping signal.
180°C
5 - ENGLISH