8 of 39
SW-41Plus 4x1 HDMI Switch User Manual
UM-002-0001-000-00 |
July 22, 2020
© 2020 Zigen Corporation
www.zigencorp.com
S
W
-4
1P
lu
s
U
se
r
M
a
n
ua
l
1
Front Panel
IR Sensor
This IR sensor receives signals from the included IR remote control unit.
HDMI Input Selection Buttons
These illuminated buttons are used to select which of the four HDMI Inputs are to be routed to the HDMI
Output. Both video and embedded audio will be routed. The selected button will illuminate blue while
all other input buttons will be off. Flashing LED behaviors may occur for alert and diagnostic purposes.
Power Button
Pressing this illuminated button will toggle between Active Mode (Blue) and low power Stand-By Mode
(Red) when power is applied from the included 12V DC power supply connected to an electrical outlet.
In Stand-By Mode, no video will be present at the output and the audio will be muted. However,
administration through the Ethernet port will still be active to wake up the SW-41Plus.
1
1
2
3
2
3
Front Panel