10 of 39
SW-41Plus 4x1 HDMI Switch User Manual
UM-002-0001-000-00 |
July 22, 2020
© 2020 Zigen Corporation
www.zigencorp.com
S
W
-4
1P
lu
s
U
se
r
M
a
n
ua
l
The default settings are:
Baud Rate: 115,200
Data Bits: 8
Stop Bits: 1
Parity: None
Flow Control: None
For information on the RS-232 control port, refer to section
10 RS-232
.
IR Input Connection
The IR Input Plug can be connected to an IR Receiver (3-pin Jack, 5V) or 3rd party Control Systems (2-pin
Jack). The pin out for the IR connectors are as follows:
Refer to section
13 Infrared (IR) Protocol
for a list of available IR command protocols used to control the
SW41Plus.
Ethernet LAN Port
The Ethernet LAN port is a 100 Base-T connection to any router, switch, or directly to a computer. The
SW-41Plus features a web interface, called ZigNet. Hardware configuration, EDID management, and
advanced diagnostics can all be accessed through ZigNet.
The Ethernet LAN also feature HTTP or Curl protocol to allow 3
rd
party Control Systems with appropriate
drivers to control the SW41Plus. Refer to section
12 Application Program Interface (API)
for more
information.
Power
The SW-41Plus requires 12VDC @ 1Amp to power the unit. Use the included power adaptor and ensure
the locking ring is threaded snugly to prevent inadvertent disconnection of the power jack. Make sure
all video, audio, and control ports are properly connected before applying power to the SW-41Plus.
GND (5)
TX (2)
RX (3)
9
IR INPUT (2 or 3 pin support)
IR In
+5VDC
GND
IR In
GND
10
11
Back Panel