4
1. Power LED:
The LED illuminates green when power is applied.
Link LED:
The LED illuminates green when there is a valid fiber optic
connection with the transmitter.
Status LED:
The LED illuminates green when the signal data is transmitting
successfully between the transmitter and receiver.
HPD:
The LED illuminates green when a display is connected to the receiver.
2. Optical In:
LC Fiber Optic input port to connect the
Optical Out
port of
transmitter by single-mode fiber or multi-mode fiber.
3. HDMI Out:
Type-A female HDMI output port to connect the display device.
4. Audio In (ARC):
Toslink digital audio input port for routing multi-channel
audio to transmitter.
5. Audio Mode Selection Switch:
ARC (Default):
Switches audio mode to ARC.
Audio:
Switches audio mode to audio pass-through (to
transmitter).
6. Audio In (ARC):
Toslink digital audio input port for routing multi-channel
audio to transmitter.
7. IR In:
3.5mm mini jack to connect IR receiver or IR system for IR pass-
through.
8. IR Out:
3.5mm mini jack to connect IR emitter for IR pass-through.
9. RS232:
terminal block to connect the RS232 control device (e.g. RTI XP6) or
a third-party device to be controlled.
10. FW:
Micro-USB port for firmware upgrade ONLY.
11. DC 12V:
Locking power port for 12V DC power adapter connection (both Tx
and Rx must be powered individually).
Receiver Description
