3
1. Power LED:
The LED illuminates green when power is applied.
Link LED:
The LED illuminates green when there is a valid fiber optic
connection with the receiver.
Status LED:
The LED illuminates green when the signal data is transmitting
successfully between the transmitter and receiver.
HPD:
The LED illuminates green when a source is connected to the
transmitter.
2. Optical Out:
LC Fiber Optic output port to connect the
Optical In
port of
receiver by single-mode fiber or multi-mode fiber.
3. HDMI In:
Type-A female HDMI input port to connect the source device.
4. Audio Out (ARC):
Toslink digital audio output port for routing multi-channel
audio from receiver to audio amplifier.
5. Audio Mode Selection Switch:
ARC (Default):
Switches audio mode to ARC.
Audio:
Switches audio mode to audio pass-through (from receiver).
6. IR In:
3.5mm mini jack to connect IR receiver or IR system for IR pass-
through.
7. IR Out:
3.5mm mini jack to connect IR emitter for IR pass-through.
8. RS232:
terminal block to connect the RS232 control device (e.g. PC) or a
third-party device to be controlled.
9. FW:
Micro-USB port for firmware upgrade ONLY.
10. DC 12V:
Locking power port for 12V DC power adapter connection (both Tx
and Rx must be powered individually).
Transmitter Description
