Matrix Switching System
—
User Manual
41
7.0.3.7 Other Application
The software utility will show you at least 32 units Device ID and Name. You can click the
Console
down list to select which device that you want to configure output /input values.
The entire connected Device name will be shown on the
Console List
as Figure 7-23.
For this model, the software utility will show at least 1 up to 32 devices. The example as
below shows you an ID: 0 for the Name: AX-88 presently.
When the
Console List
is empty, please pay attention to the location of switcher pin
on the rear panel of Device is correct. Then, click
Scan
to search the configured.
Figure 7-23 Other Application