6.3.2
Replacement of the connector on the X-K connecting lead
Before connection to the retro
fi
t kit, the connector on the X-K connecting cable must be replaced.
"
Open the socket for the X-K connector by pressing the two tabs (1) on the sides of the socket
outwards with a screwdriver.
"
Loosen the screws for the strain relief (2).
1
2
"
Remove the X-K connector socket.
"
Using a side cutter, remove the cable protection on the X-K connecting lead.
"
Connect wires 1-4 and 5-13 to the connectors supplied (3). The wires are numbered and there are
matching numbers on the connectors. If the wire designations are dif
fi
cult to read, it is useful to
reconnect the wires individually in turn.
Technical Information
Electrical installation
R-TIA18_02-D-GB 2106
Part.-No. 00163466-D-GB
13/24
