Brake with mechanical hand release system
A brake with a mechanical hand release system is available optionally. The hand release
system cannot be
fi
tted later. The complete brake must be replaced to retro
fi
t the hand release
system.
8.3.2.1
Required tool for the replacement of the brake:
•
ZIEHL-ABEGG toolkit article 70027450
•
Tool for replacing the absolute encoder (see chapter "Replacement of the absolute encoder")
•
Wire cutter
•
Cable stripper
•
Crimper
•
Slotted screwdriver 0.6 x 3.5
•
Allen key SW 17
•
screw wrench SW 10
•
screw wrench SW 13 (SM160.30B)
•
screw wrench SW 16 (SM160.40B)
•
screw wrench SW 32
•
Torque wrench for tightening torque 36 Nm with screw wrench SW 13 (SM160.30B)
•
Torque wrench for tightening torque 48 Nm with screw wrench SW 16 (SM160.40B)
•
Wrench (included in toolkit, article 70027450)
•
Assembly shaft (included in toolkit, article 70027450)
8.3.2.2
Dismounting the brake
1. Dismount the absolute encoder (see chapter "Replacement of the absolute encoder").
2. Disconnect the electrical connection (1) of both brakes.
3. Carefully remove strain reliefs (2) of all connecting cables with wire cutters.
4. Cut off varistors (3).
Service and maintenance
$7%$B*%
Part.-No. 01008166-GB (
EU-BD 845
)
20/68
2ULJLQDORSHUDWLQJLQVWUXFWLRQV
ZAtop
–
model series SM160.30B/40B
