ZIEHL-ABEGG Acontrol PKE-10 Operating Instructions Manual Download Page 27

Page: 27 / 27

Operating Instructions

Acontrol

–

model series PKE-6 /-10 / PKE-14

L-BAL-E042-GB 1002 Index002

Part.-No. 00163314-GB

26/26

11.5 Manufacturer reference

Our products are manufactured in accordance with the relevant international regulations. If you have

any questions concerning the use of our products or plan special uses, please contact:

Ziehl-Abegg AG

Heinz-Ziehl-Stra

74653 K

nzelsau

Telephone: +49 (0) 7940 16-0

Telefax: +49 (0) 7940 16-504

[email protected]

http://www.ziehl-abegg.de

11.6 Service information

If you have any technical questions while commissioning or regarding malfunctions, please contact

our V-STE support department for control systems - ventilation technology.

Our worldwide contacts are available in our subsidiaries for deliveries outside of Germany.

www.ziehl-abegg.com.

If you make returns for inspections or repairs we need certain information in order to facilitate focused

trouble shooting and fast repair. Please use our repair tickets for this. It is provided to you after you

have consulted our support department.

In addition, you can download it from our homepage. Download - Ventilation Technology - Topic:

Control Engineering - Document type: General documents.

Summary of Contents for Acontrol PKE-10




























Search results

Summary of Contents for Acontrol PKE-10

Reviews:

Brands by name

Popular brands

ZIEHL-ABEGG Acontrol PKE-10, Operating Instructions Manual

Search results

Summary of Contents for Acontrol PKE-10

Reviews:

Brands by name

Popular brands