ZIEHL-ABEGG Acontrol PKE-10, Operating Instructions Manual

Page: 12 / 27

6 Operating and display elements
28.08.2008
v_pke_bedien_anzeige.VSD
V
°C
mA
E1
%
0 100
n-min
%
0 100
R47
set
ON
OFF
4 3 2 1
S1
V13
R
4
8
n-max /
P-band
R
4
9
%
5 30
Potentiometer
set
Function dependently on selected mode of operation
•
For Speed controller 1.01 without function.
•
For temperature control 2.01 with passive sensors TF.. (KTY).
setting range: 0 - 100 % ≙ -26...76 ° C (measuring range of controller).
•
For control with active sensors 3.01 , (0 - 10 V, 4 - 20 mA).
Setting range: 0 - 100 % ≙ measuring range of sensor.
Potentiometer
n-min
Minimal output voltage (basic speed)
Setting range: 0 - 100 % ( “ n-min ” takes priority if over “ n-max ” )
Potentiometer
n-max / Pband
Function dependently on selected mode of operation
•
For speed controller 1.01 Maximal output voltage speed limiter:
– Setting range: 100 % - “ n-min ”
(100 % output voltage = fully clockwise position 30 %)
•
For P-Controller , 2.01 , 3.01 Pband (control range)
– For temperature control with passive sensors TF.. (KTY).
Setting range: 5 - 30 % ≙ 5.1 - 30.6 K.
– For control with active sensors (0 - 10 V, 4 - 20 mA).
Setting range: 5 - 30 % ≙ 5 - 30 % measuring range of sensor.
Dipswitch
S1
Basic setting for device function
Status LED
V13
Indicate the operating conditions over  ashing code
Jumper
E1
Basic setting for kind of signal at analog input “ E1 = Analog In 1 ”
Operating Instructions Acontrol – model series PKE-6 /-10 / PKE-14 Operating and display elements
L-BAL-E042-GB 1002 Index002 Part.-No. 00163314-GB
11/26