TECHNICAL DATA AND DESIGNATION
19
TECHNICAL DATA AND DESIGNATION
3.1 Type plate
Fig. 1
3.2 Information for inquiries and orders
Year of construction:
SN:
Type
The entire marking is equivalent to an official document and may not be altered or changed beyond
recognition.
Should you have questions about the machine or when ordering spare parts, state the type designation,
serial number and the year of construction of the corresponding machine. We recommend that you enter
this information in the fields above so as to ensure their availability.
Please note
ZIEGLER original spare parts and manufacturer-authorized accessories serve the security of the ma-
chine. The use of spare parts, accessories and other devices not produced, tested or authorized by
ZIEGLER will result in the loss of liability for the resulting damage.
Take the corresponding article numbers for the spare parts list.
3.3 Intended use
The pickup may only be fitted to transport vehicles for which the respective adapter frame has been
authorized (comply with the operating permission of the bearer vehicle). It is exclusively to be used for
conventional agricultural operations (intended use): please
consult the chapter introduction “Intended
use”.
Any other form of use exceeding these specifications is classed as non-intended use. The manufacturer
is not liable for any damage resulting from this form of use. The risk is carried by the operator alone.
Intended use includes the maintenance of the operating, maintenance and servicing conditions specified
by the manufacturer.
Unauthorized alterations made to the machine can exert a negative influence on the machine and impair
the orderly function. Unauthorized alterations release the manufacturer from any resulting liability
claims.