Zida V630E, User Manual

Page: 33 / 57

BIOS
Setup
LPT & COM
When On of LPT & COM, any activity from one of the listed system
peripheral devices or IRQs wakes up the system.
HDD & FDD
When On of HDD & FDD, any activity from one of the listed system
peripheral devices wakes up the system.
PCI Maste
r
When On of PCI Master, any activity from one of the listed system
peripheral devices wakes up the system.
Modem/Lan Resume
An input signal on the serial Ring Indicator (RI) line (in other words,
an incoming call on the modem or Lan) awakens the system from a
soft-off state.
RTC Alarm Resume
When Enabled, you can set the date and time at which the RTC (real-time
clock) alarm awakens the system from Suspend mode.
These options specify the IRQ priority for PCI devices installed in the PCI
expansion slots. The setting is Auto.
When set On, activity will neither prevent the system from going into a
power management mode nor awaken it.
· IRQ3 (COM 2)
- IRQ10 (Reserved)
· IRQ4 (COM 1) - IRQ11 (Reserved)
· IRQ5 (LPT 2) - IRQ12 (PS / 2 Mouse)
· IRQ6 (Floppy Disk) - IRQ13 (Coprocessor)
· IRQ7 (LPT 1) - IRQ14 (Hard Disk)
· IRQ8 (RTC Alarm) - IRQ15 (Reserved)
Mainboard User's Manual Page 33