manualshive.com logo in svg

Zida 6mlx, User Manual

Share
Download
Zida 6mlx User Manual Download Page 31

Motherboard Installation

Page 29

Chipset Setup,

 

Continued

VGA Frame Buffer USWC Set this option to Enabled to enable the VGA video frame buffer using

USWC (Uncacheable, Speculatable, Write-Combined) memory. The settings are
Enabled or Disabled. Older ISA VGA card drivers may not behave correctly if this
option is not set to Disabled. The Optimal and Fail-Safe default settings are
Disabled.

PCI Frame Buffer USWC Set this option to Enabled to enable the USWC memory attribute and

improve video performance when a PCI video adapter is installed. However, VGA
card drivers may not behave correctly when this option is set to Enabled. The
settings are Disabled or Enabled. The Optimal and Fail-Safe defaults are Disabled.

DRAM Integrity Mode This option sets the type of system memory checking. The settings are:

Setting

Description

Non ECC

No error checking or error reporting is done.

ECC Only

Multibit errors are detected and reported as parity errors. Single-bit
errors are corrected by the chipset. Corrected bits of data from memory
are not written back to DRAM system memory. If Level I is selected, the
J25 External SMI software jumper on the Series 745 board is disabled.

ECC

Multibit errors are detected and reported as parity errors. Single-bit
errors are corrected by the chipset and are written back to DRAM
system memory.
If a soft (correctable) memory error occurs, writing the fixed data back
to DRAM system memory will resolve the problem. Most DRAM errors
are soft errors. If a hard (uncorrectable) error occurs, writing the fixed
data back to DRAM system memory does not solve the problem. In this
case, the second time the error occurs in the same location, a Parity Error
is reported, indicating an uncorrectable error. If ECCI is selected,
AMIBIOS automatically enables the System Management Interface
(SMI) is enabled. If you do not want to enable power management, set
the Power Management/APM option to Disabled and set all Power
Management Setup timeout options to Disabled. To enable power
management, set Power Management /APM to Enabled and set the
power management timeout options as desired.

Cont’d

Summary of Contents for 6mlx
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands